MEQ-1073

$18.99

A preamp equalizer audio plugin that emulates the harmonic tones generated by a sought after analog equalizer used extensively in the past and currently to add warmth and tone to audio recordings.

Available as VST3/AU & AAX Plug-Ins (64-bit only) for Windows & macOS
SKU: MEQ-1073 Category: Tag:

MEQ-1073 Sound Examples

This track demonsrates using the MEQ-1073 equalizer plugin on a vocal track. The first chorus section has the plugin bypassed, whereas the second chorus section has the plugin applied.

A review by Audio Plugin Deals

Description

A preamp equalizer audio plugin that emulates the harmonic tones generated by a sought after analog equalizer used extensively in the past and currently to add warmth and tone to audio recordings. Great to add a bit of extra drive where you need it!

The top EQ band controls a fixed shelf at 12 kHz. The midband controls a bell curve with selectable frequencies at .36, .7, 1.6, 3.2, 4.8, and 7.2 kHz. The low band controls a shelf with selectable frequencies at 35, 60, 110 and 220 Hz. The selectable high-pass filter can be set at 50, 80, 160 or 300 Hz. Each band offers +/- 16 dB of gain.

Features for MEQ-1073 (a preamp equalizer audio plugin)

Craft the sound to suit your audio.

  • Push the signal to soft clip by increasing the input slider beyond zero dB. Subsequently, this will add in a subtle arctan wave shape soft-clipping which increases as the slider goes above zero dB. Therefore, this can be used to shape the output and introduce new sounds.
  • The EQ has built-in Mid-Side processing capabilities and output gain and phase controls. Use the mid/side processing to create your own EQ blend. Perhaps the side channel needs more high-end or requires different settings. For example, a drum bus may require more high-end on the hi-hat and more low-end on the kick drum. Switching between mid and side enables a separate set of controls.
  • Use the A-B comparison, so that different settings can be compared. The keep button resets the A-B functionality, so that current settings can be retained.
  • Save your presets using the inbuilt preset functionality. The plugin ships with a selection of presets that can be used as starting points to create your own EQ.
  • All plugins come with free updates, so please remember to subscribe to our mailing list to be notified of future updates.

As advertised on KVR

MEQ-1073 User Guide ⇨

MEQ-1073 User Guide

This is a guide on how to use the MEQ-1073 plugin.

The EQ has four bands. The top EQ band controls a fixed shelf at 12 kHz. The midband controls a bell curve with selectable frequencies at .36, .7, 1.6, 3.2, 4.8, and 7.2 kHz. The low band controls a shelf with selectable frequencies at 35, 60, 110 and 220 Hz. The selectable high-pass filter can be set at 50, 80, 160 or 300 Hz. Each band offers +/- 16 dB of gain.

The EQ operates in stereo mode (below) or dual-mono mode.

Stereo Channel View of the MEQ-1073 Plugin
Stereo Channel View of the MEQ-1073 Plugin
Mono Channel View of the MEQ-1073 Plugin
Mono Channel View of the MEQ-1073 Plugin

The input level can be adjusted between the values -24dB to 12dB, using the input slider.

Main Panel

  • The frequency controls (blue edged knobs) can be snapped to the desired frequency by rotating the knob, or by clicking on a value.
  • The gain controls (black-edged knobs) can be snapped to the desired gain by rotating the knob, or by clicking on a value.
  • The trim controls (red-edged knobs) can be adjusted by rotating the slider.

Controller

MSLR Panel

The MSLR panel allows the processing and the output to be controlled.

  • Select either Mid (M), Side(S), Left(L) or Right(R) or All(A) channels to activate.
  • Selecting the A button will process the left and right channels using the settings in the active main panel.
  • Selecting either M or S will perform Mid/Side processing while selecting L or R will perform LR processing. Each channel will be processed using a separate main panel for each channel.
  • Pressing either L or M will activate a panel with a grey border OR pressing R or S will activate a panel with an orange border. Settings can then be adjusted for the grouping selected.
  • If any of the MSLR buttons are active, activating the link button (situated between the LM group and the RS group) will cause both channels to be processed. If the link button is not active, then the channel selected will be unprocessed, while the other corresponding channel will be left untouched. Both signals will combine to form the output.
  • The Solo buttons (speaker buttons at the top of the group allow either channel to be muted. For instance, if M is active but S should be muted, then disable the speaker above the RS group.

Output Slider

The output slider allows the signal output to be adjusted between -∞dB and 12dB.

  • Disable the link button between the Out L and Out R to allow the sliders to move independently.
  • Use the phase buttons below each slider to toggle the phase of either the left or right channel.

Reset Button

The reset button (circular arrow button below the output slider group of controls), can be pressed to reset the plugin to factory defaults.

You may also like…

  • Equalizer Bundle

    $75.96
    Available as VST3/AU & AAX Plug-Ins (64-bit only) for Windows & macOS
  • 4-band equalizer audio plugin

    MEQ-550B

    $18.99
    Add to cart
    Available as VST3/AU & AAX Plug-Ins (64-bit only) for Windows & macOS
  • passive equalizer audio plugin

    MEQ-MKII

    $18.99
    Add to cart
    Available as VST3/AU & AAX Plug-Ins (64-bit only) for Windows & macOS