Sale!

MECHO-MULTI

$34.99 $18.99

A versatile multiband delay plugin with intuitive visual display controls, that offers up to six bands of separation.

Available as VST3/AU & AAX Plug-Ins (64-bit only) for Windows & macOS
SKU: MECHO-MULTI Category:

MECHO-MULTI Sound Examples and Overview

Description

A versatile multiband delay plugin with intuitive visual display controls, that offers up to six bands of separation. Each band is provided with the following delay functionality:

  • Custom or fractional delay from 1/2 to 1/64
  • Note, dotted or triplet echo variations on fractional delays
  • Ping pong delay which alternates between the left and right channels based on delay
  • Tempo synchronisation which will adjust delay values to suit changing tempo
  • Smoothing to adjust the change in delay time
  • LFO modulation to add some wobble to the delay times. The frequency can be selected up to 100Hz and the amount of modulation can be varied between 0% and 100%
  • Delay dry/wet mix amount can be adjusted between 0% and 100%
  • Output gain can be adjust to increase or decrease the output of the selected band

Furthermore, the plugin has a number of presets. These can be used as starting points to craft your own echo creations.

Moreover, AB comparison functionality is included allowing different settings to be compared to find the perfect delay combination.

Each band can be soloed or deactivated. Additionally, the frequency bands can be adjusted in the visual display. The output gain can also be adjusted in the visual display. The A-B functionality can be used to compare and select desired settings. A good selection of presets are provided as a starting point.

MECHO-MULTI User Guide

This is a guide on how to use the Multiband Delay plugin – a delay plugin with up to six frequency bands.

Add/remove frequency bands by hovering over the top of the visual display until a ‘+’ button appears. Click on this button at the desired crossover location. A band can be removed by clicking on the ‘x’ button on the crossover that appears before the band to be removed.

Adjust the delay by using the delay knob. Or select a fractional delay amount using the drop down to the left of these buttons. A factor between 1/64 and 2 can be selected. In fractional mode, a note, dotted or triplet based delay can be selected by choosing one f the ‘N’, ‘D’ or ‘T’ buttons. The feedback know can be used to adjust the amount of echo feedback.

The ‘PING PONG’ button can be selected to alternate the delay output between the left and right channels at each delay interval.

The ‘SYNC’ btton will engage a tempo synchronisation which will adjust the delay amount acordingly when tempo changes. This mode can only be used while not using a fractional delay time. Use the fractional delay drop down to enable this option.

Use the LFO Modulation frequency and percentage knobs to add delay time modulation. This will add a varying delay time to create some interesting effects.

The smoothing knob allow the rate of smoothing to be adjusted. This is particularly useful to smooth the delay changes in ‘SYNC’ mode.

Use the DRY/WET knob to adjust the amount of delayed signal that will occur in the ou

Each band can be soloed or deactivated. Additionally, the frequency bands can be adjusted in the visual display. The output gain can also be adjusted in the visual display. The A-B functionality can be used to compare and select desired settings. A good selection of presets for drums, vocal, guitar, bass and master are provided as a starting point.

Multiband delay plugin
Multiband delay plugin

Functionality Overview

  • Remove a band by clicking the ‘X’ icon in the visual display. This will remove the band ahead of the crossover being removed.
  • Add a band in two ways:
    • Move the mouse towards the top of the visual display. A ‘+’ icon will appear which will follow the mouse as it moves right or left. Click the icon to place a frequency crossover at the desired frequency.
    • Right click the visual display at the desired frequency. Click ‘Add crossover’
  • Move a crossover by dragging the crossover to the desired frequency.
  • Adjust the band output gain of a band by dragging the gain line (on the visual display) up or down.
  • Display the input and/or output frequency response by checking the In and/or Out checkboxes. This can be used to visually adjust the saturation and output.
  • Select a band by clicking anywhere inside a band on the visual display. The band will change to green and the associated controls will appear in the green control panel below.
  • The amount of dry/wet signal can be adjusted by using the DRY/WET knob.
  • The band output can be adjusted by using the OUTPUT knob.
  • Activate/deactivate delay by toggling the ‘A’ button at the top right of each band. The words ‘ON’ or ‘OFF’ will appear in the bands visual display depending on whether iit is active or not.
  • Solo a band by clicking on the ‘S’ button at the top right of each band.

Top Menu (Presets and A-B Comparison)

Multiband Saturator Top Menu
Top menu with A-B comparison and preset functionality

The top menu provides the following functionality:

  • A-B Comparison functionality: Click the A-B button to initiate the comparison. Make changes to the settings and then click the A-B button again to compare with the original. Click the Keep button to keep the preferred version ie. A or B.
  • Preset functionality: Select from the list of factory presets or save your own by clicking the Save Preset button. Click the Delete Preset button to delete a preset.

You may also like…